Apperture
← Back

How Apperture works

Apperture doesn't put a filter over a normal phone photo. The phone exposes for the time you set, the light is collected into a digital "negative", and that negative is developed once with the stock you loaded. This page walks through each step, including what is measured and what is only approximated.

1. The shutter: real exposure time

When you press the shutter, Apperture keeps collecting frames from the sensor for exactly the shutter speed you chose and stacks them into one image. A 2-second exposure really takes 2 seconds, so anything that moves during those 2 seconds blurs, just as it would on film. That is where the motion blur comes from. Nothing is added afterwards.

T mode starts the exposure on one press and stops it on the next. B mode exposes for as long as you hold the shutter down. In both cases the elapsed time becomes the shutter speed used for development.

2. Aperture and ISO: exposure math, not glass

Phone lenses have a fixed aperture, usually around f/1.8. Apperture can't stop the lens down, so the aperture you pick changes brightness only. The difference in stops between the phone's real aperture and your chosen one is applied to the exposure. Shooting at f/8 on an f/1.8 lens costs about 4.3 stops of light, as it would on a real camera. The aperture does not change depth of field.

ISO works differently on each platform:

  • Android, on phones that support manual sensor control: Apperture sets the sensor ISO directly and folds the aperture difference into it.
  • iPhone: the default camera doesn't accept custom exposure, so the phone picks its own exposure. Apperture reads back the ISO the phone used and scales the brightness by the ratio between your ISO and that one. The result is as bright as your settings say it should be, even though the sensor itself didn't run at your ISO.

3. The negative: light adds up

Each capture is converted to linear light, which is proportional to the number of photons, and added into a negative. The negative keeps highlight detail up to three stops above pure white. A bright sky or a street lamp is stored at its full brightness before development decides what to do with it.

This is also how double exposure works. A saved photo keeps its source captures, so its negative can be rebuilt exactly. The new frame's light is added onto that negative, and the sum is developed once. Overlapping brights can blow out, as they do on film. The original frame is replaced, because on film there is no undo.

4. Development: the film stock

Development is the only step that knows which film you loaded:

  • Highlight shoulder. Negative stocks roll off gently into the extra highlight range stored in the negative. Slide stocks (Velvia, Provia, Ektachrome and the rest) clip hard at white, which is why slide film punishes overexposure.
  • Colour response. Each stock has its own 3D colour lookup table, a 64×64×64 cube that maps every input colour to that stock's rendering. It is built from publicly available data and theory, not lab measurements.
  • Grain. The grain gets stronger as the ISO you shoot at rises above the stock's box speed. Each shot gets a new random grain pattern.
  • Push and pull. Shooting above box speed adds contrast and warms the shadows. Shooting below it softens the highlights.
  • Halation. Light from bright areas spreads into a red-dominant glow, as it does when light bounces back through the film base.

5. Reciprocity failure

Film loses sensitivity on exposures longer than about a second. Apperture models this with a separate falloff curve for each colour channel. Blue loses the most and red the least, so long exposures come out darker and with a colour shift unless you compensate. The viewfinder shows the compensated time. The same approximate curve is used for every stock. Real stocks differ, some a lot.

6. Colour filters

The Wratten filters (8, 11, 21, 25, 29, 58, 47) are modelled as the fraction of red, green and blue light each one lets through, applied at capture time. A red 25 on black-and-white film darkens blue skies for that reason. The light meter subtracts the filter factor automatically, and the viewfinder shows how many stops it costs.

7. Frame formats

Full frame (3:2), half frame (4:3) and 6×7 are crops of the same capture. The guide in the viewfinder and the crop on the developed frame are computed from the same measured preview, so the frame you get is the frame you saw. Zoom is applied on the camera itself, so it affects the preview and the capture equally.

8. The light meter and range meter

The meter reads the scene's exposure value from the camera about five times a second and shows it in EV, lux or foot-candles. Aperture priority and shutter priority modes use this reading.

Every phone's meter is slightly off. On Android phones with manual sensor control, calibration takes a few real captures of a plain wall and adjusts the exposure until the centre of the frame comes out at 18% grey. Each test averages three captures so flickering lights cancel out. iPhones apply their own adaptive tone mapping to every frame, which would throw that measurement off, so iPhones use a manual trim against a reference meter instead. Uncalibrated, the iPhone meter is already within about a third of a stop of a handheld meter.

The range meter estimates subject distance from depth data where the phone provides it, and from the lens's focus position otherwise.

9. The output

The developed frame is saved as a JPEG, up to 1920 pixels on the long edge, to your phone's photo library and to the roll of the camera you're shooting with. Your aperture, shutter speed and ISO are written into its EXIF data.

What Apperture does not simulate

  • Lens character: focal length rendering, bokeh, distortion or depth of field
  • Film ageing or decay. Expired film only lowers the effective ISO.
  • Chemistry: developer choice, development time or temperature

Every model on this page is an approximation built from publicly available photographic data and theory. It's meant to get you close enough to decide whether a shot is worth a frame of real film. It doesn't replace the real roll.

Get Apperture

Available on iOS and Android, in English, French and German. 7-day free trial, then $12.99 one-time, no subscription.